Table of Contents
Advertisement
Global mode
Exp/Comp (Mode = Time)
This command appears only when the Mode is set to
Time. It brings up a dialog box, which allows you to
expand or compress all of the duration and crossfade
times by a specified percentage.
Duration Time dialog box
Expand/Compress [%]
[0...100,000]
100% means the current duration and crossfade times.
Values 99 and below make the times shorter, and
values 101 and above make them longer.
/2 (Mode = Tempo)
This command appears only when the Mode is set to
Tempo. It cuts the step durations and/or Multiply
Base Note settings in half, so that 1/4 notes become
1/8 notes, 1/8 notes become 1/16 notes, and so on.
x2 (Mode = Tempo)
This command also appears only when the Mode is set
to Tempo. It multiplies the step durations and/or
Multiply Base Note settings by two, so that 1/8 notes
become 1/4 notes, 1/4 notes become 1/2 notes, and so
on.
▼ 4–2: Page Menu Commands
The number before each command shows its ENTER +
number-key shortcut. For more information on these
shortcuts, see "ENTER + 0-9: shortcuts for menu
commands" on page 138.
• 0: Write Wave Sequence. For more information, see
"Write Wave Sequence" on page 688.
672
Advertisement
Table of Contents
