120: Comp - Multitap Delay - Korg Electronic Keyboard Parameter Manual

Effect Guide
Resonance
Sets the resonance amount. p.805.
Wet/Dry
Sets the phaser effect balance. p.780, p.805.
Source
Selects the Wet/Dry modulation source for the phaser.
Amount
Sets the Wet/Dry modulation amount for the phaser.

120: Comp - Multitap Delay

This effect combines a mono compressor and a
multitap delay. You can change the order of the effects.
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left
Compressor
EQ Trim LEQ HEQ
+
Right
Envelope - Control
Routing
[Comp ➝ Mt.Delay, DLY ➝ Comp]
Routing
Switches the order of the compressor and multitap
delay.
Pre EQ
Trim
Sets the EQ input level.
LEQ Gain [dB]
Sets the gain of the Low EQ.
HEQ Gain [dB]
Sets the gain of the High EQ.
COMPRESSOR
Sensitivity
Sets the sensitivity. p.764.
Attack
Sets the attack level. p.764.
Output Level
Sets the compressor output level. p.764.
MULTITAP DELAY
Tap1 Time [msec]
Sets the Tap1 delay time.
862
[+/–100]
[Dry, 1:99...99:1, Wet]
[Off...Tempo]
[+/–100]
Routing
Multitap Delay
Feedback
Comp
Delay
(2)
(1)
High Damp
Mt.Dly Wet / Dry
Output Level
[0...100]
[–15...+15]
[–15...+15]
[1...100]
[1...100]
[0...100]
[0.0...1360.0]
Output Mode
Selects whether the phaser output is mono or pseudo-
stereo. For more information, see "Output Mode" on
page 857.
When Routing is set to Phaser→ → → → Comp, Output Mode
will automatically be set to Normal.
OUTPUT
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see "OUTPUT" on page 764.
Tap2 Time [msec]
Sets the Tap2 delay time.
Tap1 Level
Sets the Tap1 output level. p.832.
Wet / Dry
Feedback
Sets the Tap2 feedback amount.
High Damp [%]
Wet / Dry
Sets the damping amount in the high range. p.829.
Wet/Dry
Sets the multitap delay effect balance.
Source
Selects the Wet/Dry modulation source for the
multitap delay.
Amount
Sets the Wet/Dry modulation amount for the multitap
delay.
OUTPUT
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see "OUTPUT" on page 764.
[Normal, Wet Invert]
[0.0...1360.0]
[0...100]
[+/–100]
[0...100]
[Dry, 1:99...99:1, Wet]
[Off...Tempo]
[+/–100]