Korg Electronic Keyboard Parameter Manual page 382

Combination mode
Zone Map
Key zone display
Bottom Key
Timbre 1
Timbre 16
C–1
72: The volume will increase gradually as you play
downward, and will reach the original volume six
octaves below the top key.
Bottom Slope
Specifies the range of keys (12 is one octave) over
which the volume will be reached starting from the
bottom key.
0: The volume will be at the original level from the
bottom key.
12: The volume will increase gradually as you play
upward, and will reach the original volume one octave
above the bottom key.
72: The volume will increase gradually as you play
upward, and will reach the original volume six octaves
above the bottom key.
Bottom Key
Specifies the bottom key (lower limit) of the notes that
will sound each timbre.
How volume will change according to keyboard location
Volume
Bottom Slope
Bottom Key
Top Key and Bottom Key settings can also be input by
holding down the ENTER switch and playing a note
on the keyboard.
It is not possible to set the bottom key above the top
key of the same timbre. Nor is it possible for the top
and bottom slopes to overlap.
Timbres 02...16
These are the key zone settings for timbres 2 through
16. They are the same as for timbre 1. See "Timbre 01".
▼ 3–5: Page Menu Commands
The number before each command shows its ENTER +
number-key shortcut. For more information on these
shortcuts, see "ENTER + 0-9: shortcuts for menu
commands" on page 138.
372
Bottom Slope
E1
[00, 01, 02, 03, 04, 06, 08, 10,
12, 18, 24, 30, 36, 48, 60, 72]
[C–1...G9]
Top Slope
Top Key
Top Slope
Top Key
G9
• 0: Write Combination. For more information, see
"Write Combination" on page 405.
• 1: Exclusive Solo. For more information, see
"Exclusive Solo" on page 138.
• 2: Copy From Program. For more information, see
"Copy From Program" on page 405.
Key
Velocity zone display
Top Velocity
Top Slope
Bottom Slope
Bottom Velocity
1 16
Timbre