Korg Electronic Keyboard Parameter Manual page 388

Combination mode
When you play the keyboard, you will hear the bass of
timbre 1, whose MIDI channel is set to Gch. Since
timbre 2 is set to MIDI channel 2, it will not sound in
response to the keyboard. (See "KARMA
ON/OFF=OFF (1)" in the diagram above.)
Example setting 2
1. Follow steps 1–3 from Example setting 1, above.
2. Set KARMA Module [A] as follows.
GE Select: Any riff from the Bass GE category
Input Channel: Gch
Output Channel: Gch
Timbre Thru: Off
3. Set KARMA Module [B] as follows.
GE Select: Any riff from the Keyboard GE category
Input Channel: Gch
Output Channel: 02
Timbre Thru: On
4. Turn the KARMA ON/OFF switch on.
When you play the keyboard, the result will be the
same as for step 6 in Example setting 1. (See "KARMA
ON/OFF=ON (1)(2)" in the diagram above.)
5. Turn the KARMA ON/OFF switch off.
When you play the keyboard, you will hear the bass
timbre, whose MIDI channel is Gch. The piano of
timbre 2 will also be played by the keyboard because of
the Timbre Thru On setting of KARMA Module [B].
(See "KARMA ON/OFF=OFF (2)" in the diagram
above.)
Module – Timbre MIDI Display
This shows the timbres that will be sounded by each
KARMA Module, according to the MIDI output
channel settings of each KARMA Module and the
MIDI channel of each timbre (2–1a).
▼ 7–1: Page Menu Commands
The number before each command shows its ENTER +
number-key shortcut. For more information on these
shortcuts, see "ENTER + 0-9: shortcuts for menu
commands" on page 138.
• 0: Write Combination. For more information, see
"Write Combination" on page 405.
• 1: Exclusive Solo. For more information, see
"Exclusive Solo" on page 138.
• 2: Copy KARMA Module. For more information,
see "Copy KARMA Module" on page 408.
• 3: Initialize KARMA Module. For more
information, see "Initialize KARMA Module" on
page 409.
• 4: Copy Scene. For more information, see "Copy
Scene" on page 409.
378
• 5: Swap Scene. For more information, see "Swap
Scene" on page 409.
• 6: Capture Random Seed. For more information,
see "Capture Random Seed" on page 409.
• 7: Copy From Program. For more information, see
"Copy From Program" on page 405.