Korg Electronic Keyboard Parameter Manual page 123

A ( Module A)
Specifies the module to which the settings of RT Parm
1–8 will apply. In Program mode, only one KARMA
Module (module [A]) can be used. Thus in Program
mode, you can turn the RT Parm 1–8 settings on/off.
On (checked): RT Parm settings will be valid.
Off (unchecked): RT Parm settings will be ignored.
Assign [---, Slider1...8, Slider (SW) 1...8,
Assigns the selected parameter to a controller. If you
assign a parameter to KARMA Real-Time Controls ,
you can control it in real-time while you play.
For more information, see "ASSIGN" on page 111.
Polarity
Specifies the polarity used when you operate the
KARMA Real-Time Controls that you selected for
"Assign."
For more information, please see "POLARITY" on
page 111.
Group: PE (Performance)
Time Signature
Assigns the "KARMA T.Sig" (Program 7–1a) function.
+0000: Off
+0001...+0048: Corresponds to 1/4–16/16.
For more information, see "KARMA T.Sig (Time
Signature)" on page 99.
If you select Time Sig. as a parameter for
assignment, you will not be able to set "A (Parm
Module A)."
Group: Mix
Transpose
Assigns the "Transpose" (Program 7–3b) function.
Control the transposition in semitone steps.
Transpose Octave
Assigns the "Transpose" (Program 7–3b) function.
Control the transposition in octave steps.
Transpose Octave/5th
Assigns the "Transpose" (Program 7–3b) function.
Control the transposition in steps of an octave and a
fifth.
Group: Control
Force Range
Assigns the "Force Range" (Program 7–3b) function.
+0000: Off
+0001: Lowest
+0002: Highest
+0003: C3–B3[1]
+0004: C3–B3[2]
For more information, see "Force Range" on page 103.
[Off, On]
SW1...8, DynaMIDI1...8]
[+, –]
[+0000...+0048]
[–0036...+0036]
[–0036...+0036]
[–0036...+0036]
[+0000...+0004]
Program P7: KARMA 7–6: Perf Real-Time Parameters
Force Range Wrap
Assigns the "Force Range Wrap" (Program 7–3b)
function.
+0000: C...0011: B
For more information, see "Force Range Wrap" on
page 104.
Root Position
Assigns the "Root Position" (Program 7–3b) function.
+0000: Off
+0001: On
For more information, see "Root Position" on page 104.
Clock Advance Mode
Assigns the "Mode (Clock Advance Mode)" (Program
7–3b) function.
+0000: Auto
+0001: Dyn
+0002: Auto+Dyn1
+0003: Auto+Dyn2
For more information, see "Mode" on page 105.
Clock Advance Size
Assigns the "Size (Clock Advance Size)" (Program 7–
3b) function.
+0000...+0010: 3...
+0011: Event
For more information, see "Size" on page 105.
CA Vel. Sensitivity
Assigns the "Velocity Sense Bottom" (Program 7–3b)
function.
For more information, see "Velocity Sense Bottom" on
page 106.
CA Chord Trigger Mode
Assigns the "Chord Trigger Mode" (Program 7–3b)
function.
+0000: Off
+0001: 1st
+0002: Chrd1
+0003: Chrd2
+0004: Chrd3
For more information, see "Chord Trigger Mode" on
page 106.
Note Map Mode
Assigns the "Mode (Note Map Mode)" (Program 7–3b)
function.
+0000: Off
+0001: On-Main
+0002: On-Repeat
+0003: On-All
For more information, see "Mode (Note Map Mode)"
on page 106.
[+0000...+0011]
[+0000, +0001]
[+0000...+0003]
[+0000...+0011]
[+0001...+0127]
[+0000...+0004]
[+0000...+0003]
113