Table of Contents
Advertisement
Sequencer P0: Play/REC
0–1: MIDI Track Prog Select/Mixer
0–1a
Select Track
Info
0–1b
Here you can make basic settings for MIDI track
recording and playing back in the song, and can select
the program that will be used by each track.
0–1a: Location, Song/Track Select
Location
[001:01.000...999:16.191]
This display shows the current position in the song.
From the left, the numbers are the measure (001–999),
beat (01–16), and clock (000–191). When you modify
these values, the current location will change.
When MIDI Clock (Global 1–1a) is set to Internal
(or Auto, if no MIDI clocks are being received), the
OASYS will transmit Song Position Pointer
messages when the Location is changed.
Also, if the MIDI Clock parameter is set to External
MIDI (or Auto, if MIDI clocks are currently being
received), and Receive Ext. Realtime Commands
(Global 1–1a) is on, the Location will change in
response to received Song Position Pointer
messages.
The range in which the beat and clock can be
modified will depend on the currently specified
time signature.
Meter
[**/**, 1/4...16/4, 1/8...16/8,
This is the time signature at the current location of the
song. The time signature can be changed at each
measure.
Sequencer P0: Play/REC
**/**: This will be displayed when you press the
SEQUENCER REC/WRITE switch. Specify this when
you wish to use the time signature that is already
recorded for that measure, and wish to record without
changing the time signature.
1/4–16/4, 1/8–16/8, 1/16–16/16: This is the time signature
at the current location of the song.
Set Track Select to a MIDI Track 01–16, or Audio Track
01–16 press the SEQUENCER REC/WRITE switch,
and specify the time signature here.
When you press the SEQUENCER START/STOP
switch to begin recording, the time signature you
specify will be recorded on the Master Track and on the
already-recorded tracks.
Be aware that if you press the SEQUENCER
START/STOP switch during the pre-count to stop
recording, the time signature will not be recorded.
Normally, you will specify the time signature when
you record the first track, and select **/** when
recording subsequent tracks.
Recording from measure 2 of track 2
Track 1
Track 2
Track 1
1/16...16/16]
Track 2
0–1: MIDI Track Prog Select/Mixer
when Meter = **/**
Track 1
1 (4/4)
1 (4/4)
2 (3/4)
3 (4/4)
Track 2
1 (4/4)
1 (4/4)
Recording
1 (4/4)
2 (3/4)
3 (4/4)
1 (4/4)
Track 1
1 (4/4)
1 (4/4)
2 (3/4)
3 (4/4)
Track 2
0–1PMC
when Meter =7/8
2 (3/4)
3 (4/4)
3 (4/4)
Recording
2 (7/8)
3 (7/8)
4 (7/8)
2 (7/8)
3 (7/8)
4 (7/8)
415
Advertisement
Table of Contents
