101: Reverb Hall; 102: Reverb Smooth Hall; 103: Reverb Wet Plate; 104: Reverb Dry Plate - Korg Electronic Keyboard Parameter Manual

Effect Guide
In real acoustic spaces, high frequencies generally
delay somewhat faster than low frequencies, so
moderate amounts of damping will create a more
realistic sound.
Bass Crossover [Hz]
Sets the crossover frequency for the Bass Gain.
Gain [dB]
This lets you tailor the decay time of the reverb's low
frequencies, using the frequency set by the Bass Xover.
Negative settings make the low frequencies decay
faster than the main reverb; positive settings make
them decay more slowly.

101: Reverb Hall

This hall-type reverb simulates the reverberation of
mid-size concert halls or ensemble halls. For detailed
explanations of the parameters, see "104: Reverb Dry
Plate" on page 850.

102: Reverb Smooth Hall

This hall-type reverb simulates the reverberation of
larger halls and stadiums, and creates a smooth
release. For detailed explanations of the parameters,
see "104: Reverb Dry Plate" on page 850.

103: Reverb Wet Plate

This plate reverb simulates warm (dense)
reverberation. For detailed explanations of the
parameters, see "104: Reverb Dry Plate" on page 850.

104: Reverb Dry Plate

This plate reverb simulates dry, light reverberation.
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left
EQ Trim
LEQ HEQ
+
EQ Trim
Right
Pre EQ
Trim
Sets the EQ input level.
LEQ Fc
Selects the cutoff frequency (low or mid-low) of the
low-range equalizer.
850
[20...24.00k]
[–12.0...+6.0]
Pre Delay Thru
Reverb
Pre Delay
[0...100]
[Low, Mid-Low]
MODULATION
Rate
The O-Verb includes randomization in the reverberant
wash, to diminish resonant peaks and add a rich
character to the sound. The Rate determines the speed
of the randomization.
Depth
This determines the intensity of the randomization.
OUTPUT
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see "OUTPUT" on page 764.
LEQ Gain [dB]
Sets the gain of the Low EQ.
HEQ Fc
Wet / Dry
Selects the cutoff frequency (high or mid-high) of the
high-range equalizer.
HEQ Gain [dB]
Sets the gain of the High EQ.
Wet / Dry
REVERB
Reverb Time [sec]
Sets the reverberation time.
High Damp [%]
Sets the damping amount in the high range.
Pre Delay [msec]
Sets the delay time from the dry sound. p.851.
[0.02...5.00]
[0...100]
[–15.0...+15.0]
[High, Mid-High]
[–15.0...+15.0]
[0.1...10.0]
[0...100]
[0...200]