Korg Electronic Keyboard Parameter Manual page 484

Korg electronic keyboard user manual
Table of Contents

Advertisement

Sequencer mode
by On (OSC Off by KARMA On): The track will not
sound when the KARMA ON/OFF switch is on.
The track will sound as usual when the KARMA
ON/OFF switch is off.
Use this when you are using a KARMA Module to
control multiple tracks that are set to the same MIDI
channel, and want a specific track to be silent only
when the KARMA function is on.
For example you can use this to play a two-track layer
from the keyboard when KARMA is off, and use one
track to sound the phrase when KARMA is on.
If the Status (0–1b) of each track is INT, you can use the
"Track On/Off Ctrl" setting to stop the oscillator of
each track from sounding.
If you set "OSC On/Off Ctrl" to by Off or by On
settings and operate the KARMA ON/OFF switch
while real-time-recording a song, you must be
aware of the following points.
• In order to control this parameter during playback,
operations of the KARMA ON/OFF switch must be
recorded in real-time.
• Set "KARMA ON/OFF" (Global 2–1b) to MIDI
CC#14. If this is assigned to MIDI CC#14,
operations of the KARMA ON/OFF switch can be
recorded in real-time. (See "2–1b: MIDI CC# Assign
—KARMA Controllers" on page 659)
• Operations will also be recorded if you assign this
key to MIDI CC#00–95, but in order to avoid
confusion when receiving another CC#, you should
use CC#14.
• "KARMA ON/OFF" (Global 2–1b) will also be set
to MIDI CC#14 if you execute the page menu
command "Reset Controller MIDI Assign" with
"To:" set to Default Setting. After executing, turn
the assignment Off for other MIDI CC# Assign –
KARMA Controllers that you do not need to
record.
Track 02...16 (Track Number)
These are the wave sequence and KARMA-related
settings for MIDI tracks 2 through 16. They are the
same as for track 1. See "Track 01":.
▼ 2–5: Page Menu Commands
The number before each command shows its ENTER +
number-key shortcut. For more information on these
shortcuts, see "ENTER + 0-9: shortcuts for menu
commands" on page 138.
• 0: Memory Status. For more information, see
"Memory Status" on page 524.
• 1: Exclusive Solo. For more information, see
"Exclusive Solo" on page 138.
• 2: Rename Song. For more information, see
"Rename Song" on page 524.
• 3: Delete Song. For more information, see "Delete
Song" on page 524.
• 4: Copy From Song. For more information, see
"Copy From Song" on page 524.
• 5: Load Template Song. For more information, see
"Load Template Song" on page 524.
474
• 6: Save Template Song. For more information, see
"Save Template Song" on page 525.
• 7: FF/REW Speed. For more information, see
"FF/REW Speed" on page 525
• 8: Set Location (for Locate Key.) For more
information, see "Set Location (for Locate Key)" on
page 525.
• 9: GM Initialize. For more information, see "GM
Initialize" on page 526.
• 10: Copy From Combination. For more
information, see "Copy from Combination" on
page 526.
• 11: Copy From Program. For more information, see
"Copy From Program" on page 526.

Advertisement

Table of Contents
loading

Table of Contents