Table of Contents
Advertisement
Disk mode
1. In "To," specify the loading destination bank.
2. To load the data, press the OK button. To cancel
without loading, press the Cancel button.
Note: If "Multiple Select" (0–1a) is checked and you've
selected more than one bank, the data will be loaded
starting with the bank you specified in the "To" field.
Load a Combination
This loads the selected Combination into a specified
Bank and number in internal memory.
1. If you wish to load a combination other than the
one already selected, use "Combination" (upper
line) to select the combination that you wish to
load.
Note: The selected combination can be played from
the keyboard even before you load it. This is
convenient when you want to audition the
combination to be loaded. (See "Auditioning
sounds from disk" on page 693)
2. In "To Combination" (lower line), select the bank
and combination into which the data will be
loaded.
When you press the popup button, the
"Bank/Combination Select" window will appear.
3. To load the data, press the OK button. To cancel
without loading, press the Cancel button.
Note: If "Multiple Select" (0–1a) is checked and you've
selected more than one combination, the data will be
loaded starting with the combination you specified in
the "To" field.
Load Drum Kits
All drum kits in the .PCG file will be loaded.
1. To load the data, press the OK button. To cancel
without loading, press the Cancel button.
Load Drum Kit Bank
This loads all drum kit data of the selected bank into
the load-destination bank you specify.
706
[INT, USER-A...USER-G]
1. Use the "To" field to select the load-destination
bank.
2. To load the data, press the OK button. To cancel
without loading, press the Cancel button.
Note: If "Multiple Select" (0–1a) is checked and you've
selected more than one bank, the data will be loaded
starting with the bank you specified in the "To" field.
If you've selected USER–A – USER–G as the load-
destination for the selected drum kit bank (INT),
INT–000 – INT–015 will be loaded. If you've
selected INT as the load-destination for USER–A –
USER–G, the data will be loaded into INT–000 –
INT–015.
Load a Drum Kit
The selected drum kit will be loaded into the drum kit
number you specify as the loading destination.
1. If you wish to load a drum kit other than the one
already selected, use "Drum Kit" (upper line) to
re-select the drum kit you wish to load.
Note: The selected drum kit can be played from the
keyboard even before you load it. This is convenient
when you want to audition the drum kit to be
loaded. (See "Auditioning sounds from disk" on
page 693)
2. In "To Drum Kit" (lower line), select the loading
destination drum kit.
3. To load the data, press the OK button. To cancel
without loading, press the Cancel button.
Note: If "Multiple Select" (0–1a) is checked and you've
selected more than one bank, the data will be loaded
starting with the drum kit you specified in the "To"
field.
Load Wave Sequences
All wave sequence data of the .PCG file will be loaded.
1. To load the data, press the OK button. To cancel
without loading, press the Cancel button.
Advertisement
Table of Contents
