Global P2: Controller/Scale; 2-1: Controller - Korg Electronic Keyboard Parameter Manual

Global P2: Controller/Scale

2–1: Controller
2–1a
2–1b
2–1c
2–1a: Foot Switch & Pedal/Damper
Foot Switch Assign
This selects the function that will be controlled by a
pedal switch (such as the optional Korg PS-1)
connected to the ASSIGNABLE SWITCH jack.
For a complete list of possible assignments, please see
"Foot Switch Assignments" on page 981.
Foot Pedal Assign
Selects the function that will be controlled by a foot
volume pedal (XVP-10 or EXP-2 option [sold
separately]) connected to the ASSIGNABLE PEDAL
jack.
For a complete list of possible assignments, please see
"Foot Pedal Assignments" on page 982.
Damper Polarity
Set this to match the polarity of the damper pedal
connected to the DAMPER jack. If the polarity does not
match, operating the damper pedal will not produce
the correct result. If no damper pedal is connected, set
this to (–) KORG Standard.
(-) KORG Standard: Use this setting for "open-type"
damper pedals, such as the optional Korg DS–1H.
(+): Use this setting for "closed-type" pedals.
[Off...SW 2]
[Off...Knob 4]
[(–) KORG Standard, (+)]
Global P2: Controller/Scale
Foot Switch Polarity
Set this to match the polarity of the footswitch
connected to the ASSIGNABLE SWITCH jack. If the
polarity does not match, operating the damper pedal
will not produce the correct result. If no damper pedal
is connected, set this to (–) KORG Standard.
(-) KORG Standard: Use this setting for "open-type"
footswitches, such as the optional Korg PS–1.
(+): Use this setting for "closed-type" pedals.
2–1b: MIDI CC# Assign
—KARMA Controllers
Here you can assign control change messages to the
KARMA switches and sliders.
When you operate a switch or slider, the assigned
control change message will be transmitted from the
MIDI OUT connector.
The assigned control change messages can also be
received from an external MIDI device connected to
the MIDI IN connector, and used to control the
corresponding KARMA function.
The default settings of each parameter are as shown in
the LCD display above.
KARMA ON/OFF
This assigns a control change message to the KARMA
ON/OFF switch.
2–1: Controller
2–1PMC
[(–) KORG Standard, (+)]
[Off, MIDI CC#00...119]
659