079: Stereo/Cross Delay - Korg Electronic Keyboard Parameter Manual

Effect Guide
R Delay Time [msec]
Sets the delay time of the Right Delay.
Level
Sets the output level of the Right Delay.
Feedback (C Delay)
Sets the feedback amount of the Center Delay.
Source
Selects the modulation source for the Center Delay
feedback.
Amount
Sets the modulation amount of the Center Delay
feedback.

079: Stereo/Cross Delay

This is a stereo delay, and can by used as a cross-
feedback delay effect in which the delay sounds cross
over between the left and right by changing the
feedback routing.
Stereo In - Stereo Out
Left
Input Level D-mod
Stereo/Cross
Input Level D-mod
Right
INPUT
Input Level Dmod [%]
Sets the modulation amount of the input level. p.820.
Source
Selects the modulation source for the input level. p.820.
DELAY
Stereo/Cross
Switches between stereo delay and cross-feedback
delay.
L Delay Time [msec]
Sets the delay time for the left channel.
R Delay Time [msec]
Sets the delay time for the right channel.
L Feedback
Sets the feedback amount for the left channel.
R Feedback
Sets the feedback amount for the right channel.
Source
Selects the modulation source of feedback amount.
830
[0...5460]
[+/–100]
[Off...Tempo]
[+/–100]
High Damp Low Damp
Delay
Feedback
Spread
High Damp Low Damp
Delay
Stereo/Cross
[+/–100]
[Off...Tempo]
[Stereo, Cross]
[0.0...1360.0]
[0.0...1360.0]
[+/–100]
[+/–100]
[Off...Tempo]
High Damp [%]
Sets the damping amount in the high range. p.829.
[0...50] Low Damp [%]
Sets the damping amount in the low range. p.829.
Spread
Sets the width of the stereo image of the effect sound.
p.829.
OUTPUT
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see "OUTPUT" on page 764.
L Amount
Sets the modulation amount of the left channel
feedback.
R Amount
Sets the modulation amount of the right channel
feedback.
Wet / Dry
High Damp [%]
Sets the damping amount in the high range. p.829.
Low Damp [%]
Wet / Dry
Sets the damping amount in the low range. p.829.
Spread
Sets the width of the stereo image of the effect sound.
p.829.
OUTPUT
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see "OUTPUT" on page 764.
[0...100]
[0...100]
[0...50]
[+/–100]
[+/–100]
[0...100]
[0...100]
[–50...+50]