064: Stereo Phaser+Tremolo - Korg Electronic Keyboard Parameter Manual

064: Stereo Phaser+Tremolo

This effect combines a stereo phaser and tremolo, with
linked LFOs. Swelling phaser modulation and tremolo
effects synchronize with each other, creating a soothing
modulation effect particularly suitable for electric
piano.
Stereo In - Stereo Out
Left
Phaser
Resonance
Phaser
Right
LFO Type
LFO
LFO Phase
PHASER
Manual
Sets the phaser frequency range.
Depth
Sets the phaser modulation depth.
Source
Selects the modulation source for the phaser
modulation depth.
Amount
Sets the modulation amount for the phaser modulation
depth.
Resonance
Sets the phaser resonance amount.
Wet/Dry [–Wet, –2:98...Dry...2:98, Wet]
Sets the balance between the phaser effect and dry
sounds. p.817.
TREMOLO
Shape
Sets the degree of the tremolo LFO shaping. p.780.
Depth
Sets the tremolo modulation depth.
Source
Selects the modulation source for the tremolo
modulation depth.
Amount
Sets the modulation amount of the tremolo modulation
depth.
LFO
L/R Phase Type
Selects the type of the tremolo and phaser LFOs. p.817.
Wet / Dry
Tremolo
Phaser Wet / Dry
Phaser Wet / Dry
Tremolo
Wet / Dry
LFO Shape
[0...100]
[0...100]
[Off...Tempo]
[+/–100]
[+/–100]
[+/–100]
[0...100]
[Off...Tempo]
[+/–100]
[Phaser - Tremolo,
...Phaser LR - Tremolo LR]
Modulation and Pitch Shift
Phaser - Tremolo, Phaser - Tremolo Spin, Phaser -
Tremolo LR, Phaser LR - Tremolo, Phaser LR - Tremolo
Spin, Phaser LR - Tremolo LR.
Phaser/Tremolo Phase [degrees]
Sets the phase difference between the tremolo and
phaser LFOs. p.817.
Frequency [Hz]
This sets the LFO speed, in Hz. It applies only when
MIDI/Tempo Sync, below, is Off.
Source
This selects a modulation source for the Frequency.
Amount
This sets the Frequency modulation amount, in Hz.
MIDI/Tempo Sync
BPM
Base Note
Times
When MIDI/Tempo Sync is on, the LFO speed is set by
BPM, Base Note, and Times, instead of Frequency. For
more information, see "MIDI/Tempo Sync" on
page 777.
Type [Individual, Common1, Common2]
This controls whether the effect uses its individual
LFO, or one of the Common FX LFOs. For more
information, see "LFO Type" on page 777.
Common LFO Phase Offset [degrees]
When Type is set to Common FX LFO 1 or 2, this lets
you offset the phase from the master LFO.
OUTPUT
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see "OUTPUT" on page 764.
LFO: L/R Phase Type and Phaser/Tremolo Phase
[degrees]
Select the type of phaser LFO and tremolo LFO for the
"L/R Phase Type" parameter. How the effect sound
moves or rotates depends on the type of LFO. Selecting
"Phaser/Tremolo Phase" enables you to offset the
timing of the phaser peak and control a subtle
movement and rotation of the sound.
PHASER: Wet/Dry and OUTPUT: Wet/Dry
PHASER Wet/Dry sets the balance between the phaser
output and the dry sound. OUTPUT Wet/Dry sets the
balance between the final phaser and tremolo output
level and the dry sound.
064: Stereo Phaser+Tremolo
[–180...+180]
[0.02...20.00]
[Off...Tempo]
[–20.00...+20.00]
[Check-box]
[MIDI, 40.00...240.00]
[ ... ]
[x1...x32]
[+/–180]
817