094: Stereo Bpm Long Delay - Korg Electronic Keyboard Parameter Manual

INPUT
Input Level Dmod [%]
Sets the modulation amount of the input level. p.820.
Source
Selects the modulation source for the input level. p.820.
DELAY
BPM
MIDI syncs to the system tempo; 40-240 sets the tempo
manually for this individual effect. p.822.
Time Over? L >
Time Over? R >
The maximum delay time is 1,360msec per channel
(left and right). If the channel's combination of BPM,
Base Note, and Times exceeds this limit, the error
message "OVER!" will appear. If this occurs, change
the delay time parameters so that this message no
longer appears.
L Delay Base Note
Selects the type of notes to specify the left channel
delay time. p.822.
Times
Sets the number of notes to specify the left channel
delay time. p.822.
Adjust [%]
Fine-adjust the left channel delay time.
R Delay Base Note
Selects the type of notes to specify the right channel
delay time. p.822.

094: Stereo BPM Long Delay

The stereo delay enables you to match the delay time
with the song tempo. You can set the delay time up to
2,730msec.
Stereo In - Stereo Out
Left
Input Level D-mod
Input Level D-mod
Right
Tempo
BPM
Adjust [%]
Base Note x Times
BPM
Base Note x Times Adjust [%]
INPUT
Input Level Dmod [%]
Sets the modulation amount of the input level. p.820.
Source
Selects the modulation source for the input level. p.820.
[+/–100]
[Off...Tempo]
[MIDI, 40.00...240.00]
[---, OVER!]
[---, OVER!]
[ ... ]
[x1...x32]
[–2.50...+2.50]
[ ... ]
Wet / Dry
High Damp Low Damp
Delay
Feedback
High Damp Low Damp
Delay
Wet / Dry
[+/–100]
[Off...Tempo]
Delay 094: Stereo BPM Long Delay
Times
Sets the number of notes to specify the right channel
delay time. p.822.
Adjust [%]
Fine-adjust the right channel delay time.
L Feedback
Sets the feedback amount for the left channel.
R Feedback
Sets the feedback amount for the right channel.
Source
Selects the modulation source of feedback amount.
L Amount
Sets the modulation amount of the left channel
feedback.
R Amount
Sets the modulation amount of the right channel
feedback.
High Damp [%]
Sets the damping amount in the high range. p.829.
Low Damp [%]
Sets the damping amount in the low range. p.829.
OUTPUT
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see "OUTPUT" on page 764.
DELAY
BPM
MIDI syncs to the system tempo; 40-240 sets the tempo
manually for this individual effect. p.822.
Time Over? L >
Time Over? R>
The maximum delay time is 2,730msec per channel
(left and right). If the channel's combination of BPM,
Base Note, and Times exceeds this limit, the error
message "OVER!" will appear. If this occurs, change
the delay time parameters so that this message no
longer appears.
L Delay Base Note
Selects the type of notes to specify the left channel
delay time. p.822.
Times
Sets the number of notes to specify the left channel
delay time. p.822.
[x1...x32]
[–2.50...+2.50]
[+/–100]
[+/–100]
[Off...Tempo]
[+/–100]
[+/–100]
[0...100]
[0...100]
[MIDI, 40.00...240.00]
[---, OVER!]
[---, OVER!]
[ ... ]
[x1...x32]
843