Mixer - Korg Electronic Keyboard Parameter Manual

Audio CD
In Sampling mode you can apply the insert effects,
master effects, and total effects to the sound of an
audio CD from the internal CD-R/W or a USB-
connected external CD drive.
In the P5: Audio CD page, use "Drive Select" to select
the drive from which you want to input CD audio, and
use Bus Select to select the bus to which you want to
send the CD audio. You can choose from L/R, IFX1–12,
1–8, 1/2–7/8, and Off. If you want to send the CD
audio to the master effects and Bus Select is set to L/R
or Off, adjust Send1 (to MFX1) and Send2 (to MFX2).

Mixer

The input levels to the master effects are determined
by the send levels. In the P9: Routing page of each
mode, you can specify the output level and chaining
(series connection) between the two master effects.
Return1, Return2
These adjust the amount of signal that is returned from
the master effects MFX1 and MFX2 outputs to the L/R
bus.
The left-side value of the Wet/Dry parameter for the
MFX1 or 2 effect is the output level of that master
effect. (In other words if Wet/Dry is 25:75, the output
level is 75%. It is 100% if Wet, and 0% if Dry.) The
Wet/Dry value multiplied by the Return1 or Return2
value is sent to the L/R bus and mixed with the P8 -
Routing page Bus Select L/R or Insert FX page Bus
Select L/R output.
Master Effects (MFX1, 2)
If Bus Select is set to IFX1–12, adjust the post-IFX
Send1 and Send2. If Bus Select is set to 1–8 or 1/2–
7/8, the CD audio will not be sent to the master effect.
Disk mode
In the Disk mode P1– Play Audio CD page as well, you
can play back an audio CD and apply the insert effects,
master effects, and total effects to the playback. Bus
Select, Send1 (to MFX1), Send2 (to MFX2), FX Ctrl
Bus, REC Bus, Pan, and Level are linked with the
settings of Sampling mode.
In Disk mode, effects will use the settings of the
previously selected mode.
3–2
3–1
For example, with MFX1 Wet/Dry set to 50:50 (50%)
and Return1 set to 64 (50%), the resultant effect level
will be 25%. The effect level is maximum (100%) when
Wet/Dry is set to "Wet" and Return1 is set to 127.
Chain check box
Press this box to chain MFX1 and MFX2 to each other.
In the example shown in the preceding page, the
output of MFX1 (Stereo Chorus) is added to the input
of MFX2 (Reverb Hall).
Mixer
3–3
3–4
751