Table of Contents
Advertisement
Timbres 02...16
These are the MIDI Filter3 settings for timbres 2
through 16. They are the same as for timbre 1. See
"Timbre 01".
▼ 3–3: Page Menu Commands
The number before each command shows its ENTER +
number-key shortcut. For more information on these
shortcuts, see "ENTER + 0-9: shortcuts for menu
commands" on page 138.
3–5: Keyboard Zones
1–1a
3–5a
1–1b
3–5b
These settings specify the keyboard range in which
each timbre will sound.
The top/bottom key parameters specify the range of
notes in which timbres 1–16 will sound, and the
top/bottom slope parameters specify the range over
which the original volume will be reached.
Key Split: By setting timbres of different sounds to
ranges that do not overlap, you can play different
sounds in different ranges of the keyboard.
Layer: By setting the ranges to overlap, you can play
two or more sounds with a single note.
Positional Cross-fade: If you set the slopes (the grayed
portion) to overlap, the sounds will overlap, and the
proportion of the overlap will change according to the
keyboard location.
3–5a: Zone Map
This area indicates the note and velocity ranges in
which each timbre will sound.
Combination P3: MIDI Filter/Zones
• 0: Write Combination. For more information, see
"Write Combination" on page 405.
• 1: Exclusive Solo. For more information, see
"Exclusive Solo" on page 138.
• 2: Copy From Program. For more information, see
"Copy From Program" on page 405.
The LCD screen will display a line to indicate the range
of notes and velocities that will sound, and will show
the slope portion.
3–5b: Keyboard Zones
Timbre 01
Top Key
Specifies the top key (upper limit) of the notes that will
sound each timbre.
Top Slope
Specifies the range of keys (12 is one octave) over
which the volume will be reached starting from the top
key.
0: The volume will be at the original level from the top
key.
12: The volume will increase gradually as you play
downward, and will reach the original volume one
octave below the top key.
3–5: Keyboard Zones
3–5PMC
[C–1...G9]
[00, 01, 02, 03, 04, 06, 08, 10,
12, 18, 24, 30, 36, 48, 60, 72]
371
Advertisement
Table of Contents
