Korg Electronic Keyboard Parameter Manual page 746

Effect Guide
Fig. 2–1b
Fig. 2–1c
Combination and Sequencer modes
Use Bus Select (P8: "Routing" 1 and 2 page in each
mode) for timbres (Combination) and tracks
(Sequencer) to select an Insert Effect to apply to the
corresponding timbres and tracks. You can route
multiple timbres and tracks to a single Insert Effect.
Tip: You can use each timbre/track's Bus Select, post-
IFX Chain to and Chain parameters (P8 - Insert FX
page of each mode) to create a variety of routings.
736