Korg Electronic Keyboard Parameter Manual page 98

Program mode: HD-1
Stop
On (checked): When Stop is On, the LFO does not
advance, and the Frequency parameters are ignored.
Instead, the LFO simply generate a single value when
the Program is selected, and then holds that value until
you select another Program, or until you reset the LFO
via AMS.
Note: this is different from LFO1/2, in which the value
is reset with every note-on.
You can use this in conjunction with the Random
waveforms to create static, random modulation, with
the value changing only when you first select the
Program.
Off (unchecked): When Stop is Off, the LFO will
function normally.
Reset AMS
This selects an AMS source to reset the LFO to the Start
Phase. The LFO resets when the AMS value passes the
halfway mark: +50 for most AMS sources, or 64 for
MIDI controllers.
To create an effect similar to the per-voice LFO's Key
Sync Off setting, set this to Gate 1+ Damper.
Offset
By default, almost all of the LFO waveforms are
centered around 0, and then swing all the way from
–99 to +99. This parameter lets you shift the LFO up
and down, so that–for instance–it's centered on 50, and
then swings from –49 to +149.
For a complete description, please see the entry under
LFO1 "Offset," on page 85.
5–9b: Frequency Modulation
These parameters are identical to the Frequency
Modulation settings for LFO1, as described under "5–
1b: Frequency Modulation," on page 85.
5–9c: Frequency MIDI/Tempo Sync
These parameters are identical to the Frequency
MIDI/Tempo Sync for LFO1, as described under "5–
1c: Frequency MIDI/Tempo Sync," on page 86.
▼ 5–9: Page Menu Commands
The number before each command shows its ENTER +
number-key shortcut. For more information on these
shortcuts, see "ENTER + 0-9: shortcuts for menu
commands" on page 138.
• 0: Write Program. For more information, see "Write
Program" on page 138.
• 1: Exclusive Solo. For more information, see
"Exclusive Solo" on page 138.
88
[Off, On]
[List of AMS Sources]
[–99...+99]