129: Exciter - Multitap Delay - Korg Electronic Keyboard Parameter Manual

Effect Guide
PHASER
LFO
Waveform
Selects the LFO Waveform.
Frequency [Hz]
Sets the LFO speed.
PHASER
Manual
Sets the frequency to which the effect is applied.
Depth
Sets the depth of LFO modulation.
Resonance
Sets the resonance amount. p.805.

129: Exciter - Multitap Delay

This effect combines a mono exciter and a multitap
delay.
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left
Exciter
EQ Trim LEQ HEQ
+
Right
EXCITER
Pre EQ
Trim
Sets the EQ input level.
LEQ Gain [dB]
Sets the gain of the Low EQ.
HEQ Gain [dB]
Sets the gain of the High EQ.
EXCITER
Emphasis Frequency
Sets the frequency range to be emphasized. p.775.
Exciter Blend
Sets the intensity (depth) of the Exciter effect. p.775.
MULTITAP DELAY
Tap1 Time [msec]
Sets the Tap1 delay time.
Tap2 Time [msec]
Sets the Tap2 delay time.
868
[Triangle, Sine]
[0.02...20.00]
[0...100]
[0...100]
[+/–100]
Multitap Delay
Feedback
Delay
Exciter
(2)
(1)
High Damp
Mt.Dly Wet / Dry
[0...100]
[–15...+15]
[–15...+15]
[+/–100]
[0.0...1360.0]
[0.0...1360.0]
Output Mode
Selects whether the phaser output is mono or pseudo-
stereo. For more information, see "Output Mode" on
page 857.
Wet/Dry
Sets the phaser effect balance. p.780, p.806.
Source
Selects the Wet/Dry modulation source for the phaser.
Amount
Sets the Wet/Dry modulation amount for the phaser.
OUTPUT
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see "OUTPUT" on page 764.
Tap1 Level
Sets the Tap1 output level. p.832.
Feedback
Wet / Dry Sets the Tap2 feedback amount.
High Damp [%]
Sets the damping amount in the high range. p.829.
Wet/Dry
Wet / Dry
Sets the multitap delay effect balance.
Source
Selects the Wet/Dry modulation source for the
multitap delay.
Amount
Sets the Wet/Dry modulation amount for the multitap
delay.
OUTPUT
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see "OUTPUT" on page 764.
[0...70]
[Normal, Wet Invert]
[Dry, 1:99...99:1, Wet]
[Off...Tempo]
[+/–100]
[0...100]
[+/–100]
[0...100]
[Dry, 1:99...99:1, Wet]
[Off...Tempo]
[+/–100]