049: Stereo Random Flanger; 050: Stereo Envelope Flanger - Korg Electronic Keyboard Parameter Manual

Effect Guide
OUTPUT
Wet/Dry
Sets the balance between the "wet" processed sound
and the dry input. Negative values invert the phase of
the wet signal. This interacts with Feedback; for more
information, see "Feedback" on page 803.

049: Stereo Random Flanger

The stereo effect uses a step-shape waveform and
random LFO for modulation, creating a unique
flanging effect.
Stereo In - Stereo Out
Left
Right
LFO: Step-Tri/Random
FLANGER
Delay Time [msec]
Sets the delay time from the original sound.
Depth
Sets the depth of LFO modulation.
Feedback
This controls the intensity of the flanger. For more
information, see "Feedback" on page 803.

050: Stereo Envelope Flanger

This Flanger uses a MIDI-triggerable envelope
generator for modulation. This lets you create
sequences with flanger sweeps which always happen
on the same beat, for instance. You can also control the
Flanger directly using a modulation source.
Stereo In - Stereo Out
Left
Right
D-mod
D -mod
EG Attack/Decay
EG
CONTROL
Sweep Mode
When Sweep Mode is set to EG, the envelope
generator controls the flanger. Note that this is the
effect's own EG, and isn't related to the Program's
other EGs (Filter, Amp, etc.).
804
[–Wet...–1:99, Dry, 1: 99...Wet]
Flanger
Feedback
High Damp
Flanger
LFO Phase
[0.0...50.0]
[0...100]
[+/–100]
Flanger
Feedback
High Damp
Flanger
Sweep Mode
[EG, Dmod]
Source
Selects a modulation source for Wet/Dry.
Amount
Sets the modulation amount for Wet/Dry.
High Damp [%]
Sets the feedback damping amount in the high range.
p.803.
LFO
Wet / Dry
These parameters control the shape and speed of the
step LFO. They are identical to those in the Stereo
Random Filter; for more information, see "LFO" on
page 779.
Wet / Dry
UTPUT
O
Wet/Dry
Sets the balance between the "wet" processed sound
and the dry input. Negative values invert the phase of
the wet signal. This interacts with Feedback; for more
information, see "Feedback" on page 803.
Source
Selects a modulation source for Wet/Dry.
Amount
Sets the modulation amount for Wet/Dry.
The Source parameter, below, selects the source that
starts the envelope generator. If you select Gate, for
example, the envelope will be triggered by note-ons.
The EG is triggered when the MIDI source's value
changes from 63 or smaller to 64 or higher.
When Sweep Mode is set to Dmod, the modulation
source directly controls the flanger. Select the
Wet / Dry
modulation source using the Source parameter, below.
Source
Selects the modulation source that triggers the EG
(when Sweep Mode = EG), or the modulation source
that causes the flanger to sweep (when Sweep Mode =
Wet / Dry
Dmod).
EG
Attack
Sets the EG attack time. For more information Attack
and Release, see the graphic under "Attack [msec]" on
page 766.
[Off...Tempo]
[+/–100]
[0...100]
[–Wet...–1:99, Dry, 1: 99...Wet]
[Off...Tempo]
[+/–100]
[Off...Tempo]
[1...100]