Table of Contents
Advertisement
8–6: Track View
8–6a
8–6b
8–6a: Track View
This shows the oscillator output and insert effect
routing.
The selected slot is shown in dark blue. In the
"Selected" area below, you can specify the "Effect
Type" and "On/Off" status. The "Insert IFX Slot" and
"Cut IFX Slot" page menu commands will apply to the
slot you select here.
If you move from this page to the P8– IFX1-12 page, the
IFX you choose here will be selected.
8–6b: Selected
Here you can specify the "Effect Type" and "On/Off"
status of the insert effect slot selected by Track Select.
See "8–6a: Track View," above.
▼ 8–6: Page Menu Commands
The number before each command shows its ENTER +
number-key shortcut. For more information on these
shortcuts, see "ENTER + 0-9: shortcuts for menu
commands" on page 138.
• 0: Copy Insert Effect. For more information, see
"Copy Insert Effect" on page 149.
• 1: Swap Insert Effect. For more information, see
"Swap Insert Effect" on page 150.
• 2: Insert IFX Slot. For more information, see "Insert
IFX Slot" on page 150.
• 3: Cut IFX Slot. For more information, see "Cut IFX
Slot" on page 151.
Sampling P8: Insert Effect
8–5b
• 4: Clean Up IFX Routings. For more information,
see "Clean Up IFX Routings" on page 152.
8–6: Track View
8–6PMC
607
Advertisement
Table of Contents
