Korg Electronic Keyboard Parameter Manual page 31

Solo switch and Select switches 1–2
Solo
Solo lets you isolate one or more Oscillators or Audio
Inputs, so that you hear them by themselves. It does
this by temporarily muting all non-soloed Oscillators
and Audio Inputs.
Solo uses the Select switches. These switches can show
and control either which Oscillator is currently
selected, or which Oscillators are soloed. The main
Solo button lets you switch back and forth between the
two views.
When Solo is Off (LED = Off), the Select switches select
the current Oscillator; when Solo is On (LED = On or
blinking), the Select switches let you solo one or both
Oscillators.
When Solo is On, and one or more Oscillators or Audio
Inputs are soloed, the Solo LED will blink on and off to
remind you that solo is in use.
Note: The main Solo button merely changes the
functions of the Select/Solo switches. It does not
enable or clear the individual solo states.
Clearing all solos
To clear all solos:
1. Press and hold the CONTROLLER RESET button.
2. While holding CONTROLLER RESET, press the
SOLO button.
Exclusive Solo menu parameter
The menu's Exclusive Solo parameter also affects the
way that Solo works. When Exclusive Solo is Off
(unchecked), you can solo multiple oscillators and
inputs at once.
When Exclusive Solo is On (checked), only one
oscillator or input can be soloed at a time. In this mode,
pressing a Solo switch automatically disables any
previous solos.
You can also toggle Exclusive Solo by holding ENTER
and pressing 1 on the numeric keypad.
OSC1 Select/Solo
This switch either selects or solos Oscillator 1,
depending on the Solo switch. For more details, see
"Solo," above.
OSC2 Select/Solo
This switch either selects or solos Oscillator 2,
depending on the Solo switch. For more details, see
"Solo," above.
MIX VOLUMES Sliders 1–2
These sliders adjust the overall output level of
Oscillators 1 and 2. These are separate volume controls,
which scale the main Amp level parameter.
OSC 1 Volume
This slider adjusts the volume level of Oscillator 1.
OSC 2 Volume
This slider adjusts the volume level of Oscillator 2.
Master Volume Slider
[Off, On] Master Volume
This controls the volume of the main stereo outputs,
after the Total Effects. It does not affect Individual
Outputs 1–8.
Master Volume
Control Surface
Master Volume
Slider
TFX 2
[Off, On]
[Off, On]
[000...127]
[000...127]
Program P0: Play 0–9: Control Surface
Universal Exclusive
Master Volume Analog Volume
(Fom Knobs, Pedals,
MIDI, or Sequencer)
[000...127]
Front Panel
Slider
Headphone
& Main L/R
Outputs
S/PDIF
Output
21