072: Pitch Shift Mod - Korg Electronic Keyboard Parameter Manual

INPUT
Input Level Dmod [%]
Sets the modulation amount of the input level. p.820.
Source
Selects the modulation source for the input level. p.820.
PITCH SHIFTER
Mode
Switches Pitch Shifter mode. p.821.
L/R Pitch
Determines whether or not the L/R pitch shift amount
is inverted. p.821.
Pitch Shift [1/2 steps]
Sets the pitch shift amount in steps of a semitone. p.821
Fine [cents]
Sets the pitch shift amount in steps of one cent. p.821
Source
Selects the modulation source of pitch shift amount.
p.821.
Pitch Shift Amount
Sets the modulation amount of pitch shift amount.
p.821.
Fine Amount
Sets the modulation amount of pitch shift amount Sets
the modulation amount of pitch shift amount. p.821.
DELAY
BPM
MIDI syncs to the system tempo; 40-240 sets the tempo
manually for this individual effect. p.822.

072: Pitch Shift Mod.

This effect uses an LFO to modulate the pitch shift
amount, and lets you adjust the panning and stereo
width between the effected and dry sounds.
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left
+
Pitch Shifter
Right
LFO: Tri / Sqr
[+/–100]
[Off...Tempo]
[Slow, Medium, Fast]
[Normal, Up/Down]
[–24...+24]
[+/–100]
[Off...Tempo]
[–24...+24]
[+/–100]
[MIDI, 40.00...240.00]
Wet / Dry
Pan
Wet / Dry
Modulation and Pitch Shift
Time Over? L >
Display the error message if the left channel delay time
exceeds the upper limit. p.822.
Time Over? R >
Display the error message if the right channel delay
time exceeds the upper limit. p.822.
L Base Note
Selects the type of notes to specify the left channel
delay time. p.822.
Times
Sets the number of notes to specify the left channel
delay time. p.822.
R Base Note
Selects the type of notes to specify the right channel
delay time. p.822.
Times
Sets the number of notes to specify the right channel
delay time. p.822.
Feedback Position
Switches the feedback connection. p.821.
Feedback
Sets the feedback amount. p.821.
High Damp [%]
Sets the damping amount in the high range.
Spread
Sets the width of the stereo image of the effect sound.
OUTPUT
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see "OUTPUT" on page 764.
PITCH SHIFTER
Pitch Shift [cents]
Sets the pitch difference from the input signal.
Depth
Sets the LFO modulation depth for pitch shift amount.
Pitch Shift Mod - Pitch Shift / Depth
Pitch
Original Pitch
072: Pitch Shift Mod.
[---, OVER!]
[---, OVER!]
[ ...
[x1...x32]
[ ...
[x1...x32]
[Pre, Post]
[+/–100]
[0...100]
[+/–100]
[+/–100]
[+/–100]
LFO Waveform=Triangle
Depth (+value)
Pitch Shift (+ value)
LFO Waveform=Square
Depth (—value)
823