Table of Contents
Advertisement
In addition to the content copied when "GE RTP
Control Setting & Scenes" is Off (unchecked), the
following content is copied.
•7–5: GE RTP page "ASSIGN" and "POLARITY"
settings.
•The KARMA CONTROLS slider and KARMA
SWITCH settings of each scene in the copy-
source buffer, and the currently selected scene.
•7–8: Names/Note Map controller name settings.
If you turn "Perf. RTP & Panel Setting" On
(checked)
In addition to the content copied when "Perf. RTP &
Panel Settings" is Off (unchecked), the following
content is copied.
•"Tempo" setting.
•"Time Signature" setting.
•KARMA ON/OFF switch setting.
•KARMA LATCH switch setting.
•KARMA Module Control switch setting.
•7–6: Perf Real– Time Parameters page settings.
•7–7: Dynamic MIDI Page settings.
The "Input Channel" and "Output Channel"
(Combination/Sequencer P7–1) settings of a
combination or song are not copied.
Initialize KARMA Module
Initialize KARMA Module is available on all of the
KARMA pages, as well as the KARMA GE tab of the
Play page.
This command sets the KARMA Module's parameters
to their default values.
The GE selection will not be initialized. The GE
parameter "Values" will be set to the default values
that are preset for the selected GE.
1. Select "Initialize KARMA Module" to open the
dialog box.
2. As appropriate for the settings you want to
initialize, you can turn on (check) the "GE RTP
Control settings & Scenes" and/or "Pref. RTP &
Panel Setting" options.
For more information, see "Settings initialized by
Initialize KARMA Module," below.
3. To initialize the settings, press the OK button. To
cancel without initializing, press the Cancel
button.
Settings initialized by Initialize KARMA Module
If you initialize with the "GE RTP Control Settings &
Scenes" and "Pref. RTP & Panel Setting" options
turned Off (unchecked), the following parameters will
be initialized.
• 7–1–4 module parameters.
• 7–5: GE Real– Time Parameters page "MIN,"
"MAX," and "VALUE" (they will return to the
values preset by the GE).
The GE selection will not be initialized.
Program: Page Menu Commands
If you initialize with "GE RTP Control Settings &
Scenes" turned On (checked)
In addition to the parameters initialized with the Off
(unchecked) setting, the following parameters will also
be initialized.
• 7–5: GE Real– Time Parameters page "ASSIGN"
(→Off) and "POLARITY" (→+).
• KARMA CONTROLS slider and KARMA SWITCH
settings in each scene (→064/0).
• KARMA CONTROLS slider and KARMA SWITCH
names (→no name).
If you initialize with "Perf. RTP & Panel Settings"
turned On (checked)
In addition to the parameters initialized with the Off
(unchecked) setting, the following parameters will also
be initialized.
• 7–6: Perf Real– Time Parameters page parameters.
• 7–7: Dynamic MIDI page parameters.
Copy Scene
Copy Scene is available on all of the KARMA pages, as
well as the KARMA GE tab of the Play page. It's also
available on the Control Surface page, when
CONTROL ASSIGN is set to Real-Time
Knobs/KARMA.
This command copies settings for the KARMA Scenes.
You can use this command when you want to make
settings for a scene based on the other scene settings
you edited, or vice versa.
1. Choose "Copy Scene" to open the dialog box.
2. In "From:" select the scene that you wish copy.
3. In "To:" select the copy destination scene.
4. To execute the copy, press the OK button. To cancel
without executing, press the Cancel button.
Swap Scene
Swap Scene is available on all of the KARMA pages,
as well as the KARMA GE tab of the Play page. It's also
available on the Control Surface page, when
CONTROL ASSIGN is set to Real-Time
Knobs/KARMA.
This command swaps (exchanges) the settings of two
KARMA Scenes.
1. Choose "Swap Scene" to open the dialog box.
2. In "Source1" and "Source2", select two KARMA
Scenes. that you wish to swap.
3. To execute the swap, press the OK button. To
cancel without executing, press the Cancel button.
Capture Random Seed
Capture Random Seed is available on all of the
KARMA pages, as well as the KARMA GE tab of the
Play page.
The Start Seed is the source of the randomness of the
phrase generated by the KARMA Module. For more
information, see "Start Seed" on page 115.
Initialize KARMA Module
147
Advertisement
Table of Contents
