Line Coverage Extension (#208); Considerations; Programming - Avaya PARTNER ACS Installation And Use Manual

Line Coverage Extension (#208)

Use this feature to identify an extension as the "owner" of a specific outside line, so the extension
can activate Call Coverage or VMS Cover for that line.

Considerations

This feature applies only if you have a voice messaging system.
I
Only one owner can be assigned to a specific line. However, multiple lines can be owned by
I
the same extension.
This feature provides an alternative method of routing outside calls to the voice messaging
I
system for Call Answer Service.
This feature has no effect on the CO Line Ownership procedure in PARTNER Messaging,
I
PARTNER MAIL, PARTNER MAIL VS or the PARTNER Voice Messaging PC Card.
An extension's "owned" line is eligible for coverage only if Line Ringing is set to Immediate
I
Ring or Delayed Ring and Line Access Restriction (#302) or Pool Access Restriction
(#315) is set to No Restriction or In Only.
Use Call Coverage to redirect an extension's calls on owned lines to the covering extension.
I
Use Call Coverage Rings (#116) or (#320) to specify the number of times a call rings at the
I
owner's extension before it is sent to the covering extension.
Use VMS Cover or Automatic VMS Cover (#310) to redirect the extension's calls on owned
I
lines to the voice messaging system.
Use VMS Cover Rings (#117) or (#321) to specify the number of times a call rings at the
I
owner's extension before it is sent to the voice messaging system.
To use Call Screening (F25), the station must be the Line Coverage Extension for that line.
I

Programming

To change the Line Coverage setting for an extension:
f00ss#208
1. Press
2. Enter the desired line number.
3. Enter the number of the extension to be assigned ownership of the line.
4. Do one of the following:
To delete the current setting, press
I
To program another line, press
I
display. Then repeat Step 3.
5. Select another procedure, or exit programming mode.
at extension 10 or 11.
r
.
n p
or until the line number appears on the
Programming System Options

Line Coverage Extension (#208)

4-43