Function:goft:operation - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

16
:FUNCtion Commands

:FUNCtion:GOFT:OPERation

Command Syntax
:FUNCtion:GOFT:OPERation <operation>
<operation> ::= {ADD | SUBTract | MULTiply}
The :FUNCtion:GOFT:OPERation command sets the math operation for the
g(t) source that can be used as the input to transform or filter functions
(if available):
• ADD — Source1 + source2.
• SUBTract — Source1 - source2.
• MULTiply — Source1 * source2.
The :FUNCtion:GOFT:SOURce1 and :FUNCtion:GOFT:SOURce2 commands
are used to select source1 and source2.
Query Syntax
:FUNCtion:GOFT:OPERation?
The :FUNCtion:GOFT:OPERation? query returns the current g(t) source
operation setting.
Return Format
<operation><NL>
<operation> ::= {ADD | SUBT | MULT}
See Also
•
•
•
•
340
(see page 1138)
"Introduction to :FUNCtion Commands"
":FUNCtion:GOFT:SOURce1"
":FUNCtion:GOFT:SOURce2"
":FUNCtion:SOURce1"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 326
on page 341
on page 342
on page 352