Configure Debug-Trace Udp-Forwarding - Extreme Networks ExtremeWare Command Reference Manual

Troubleshooting Commands

configure debug-trace udp-forwarding

configure debug-trace udp-forwarding <debug level> vlan <vlan name>
Description
This command is not currently supported.
Syntax Description
debug level Specifies a debug level:
0 — Not currently supported.
1 — Not currently supported.
2 — Not currently supported.
3 — Not currently supported.
4 — Not currently supported.
5 — Not currently supported.
vlan name Specifies a VLAN name.
Default
The default level is 0.
Usage Guidelines
This command is not currently supported.
Example
This command is not currently supported.
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
2196 ExtremeWare Software 7.3.0 Command Reference Guide