Enable Slb Node Ping-Check - Extreme Networks ExtremeWare Command Reference Manual
Version 7.7
Hide thumbs
Also See for ExtremeWare:
- Command reference manual (2546 pages) ,
- Command reference manual (2254 pages) ,
- Command reference manual (1598 pages)
Table of Contents
Advertisement
enable slb node ping-check
enable slb node [all | <ip address>] ping-check
Description
Enables layer 3 ping check.
Syntax Description
all
ip address
Default
Ping check is enabled by default.
Usage Guidelines
Ping check is automatically enabled when a node is added to a pool.
To disable ping check on a node, use the following command:
disable slb node ping-check
Example
The following command enables all ping checks:
enable slb node all ping-check
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all "i" series platforms.
ExtremeWare 7.7 Command Reference Guide
Specifies all nodes.
Specifies the IP address of the node.
enable slb node ping-check
629
Advertisement
Table of Contents
Need help?
Do you have a question about the ExtremeWare and is the answer not in the manual?