Preface; Audience; Document Organization; Related Documents - Cisco SR2016T-NA Reference Manual

Audience

Audience
This guide is intended for system administrators and support engineers who configure and maintain the
cable CMTS and CM devices.

Document Organization

This guide includes the following sections:
Title
Chapter 1, "Supported Platforms
and Cisco IOS Releases"
Chapter 2, "Cisco CMTS
Configuration Commands"
Chapter 3, "Cisco CMTS Show
Commands"
Chapter 4, "Commands for the
Cisco uBR10012 Router"
Chapter 5, "Cisco CMTS
Debugging Commands"
Chapter 6, "Cable CPE Commands"
Appendix A, "Using the ROM
Monitor"
Index

Related Documents

This section lists the documents that provide more detailed hardware and software information about the
Cisco CMTS routers and Cisco Cable CPE devices documented in this guide. These documents are
available on Cisco.com and the customer documentation CD-ROM.

Cisco CMTS Hardware Installation and Software Configuration Guides

For detailed information about the Cisco CMTS platforms, see the following documents:
•
•
•
•
Cisco Broadband Cable Command Reference Guide
vi
Cisco uBR7100 Series Hardware Installation Guide
Cisco uBR7100 Series Software Configuration Guide
Cisco uBR7200 Series Universal Broadband Router Hardware Installation Guide
Cisco uBR7200 Series Universal Broadband Router Software Configuration Guide
Description
Provides an overview of the Cisco Broadband Cable Command
Reference Guide, including the Cisco IOS releases that are
documented.
Describes the cable-specific configuration commands that are
used to configure the Cisco CMTS features.
Describes the cable-specific show commands used to maintain
and troubleshoot the Cisco CMTS features.
Describes the commands that are specific to the
Cisco uBR10012 router and its Parallel Express Forwarding
(PXF) processors.
Describes the cable-specific debugging commands for the
Cisco CMTS routers.
Describes the cable-specific commands available to the family
of Cisco cable customer premises equipment (CPE) devices.
Describes how to use the commands available when running the
ROM monitor (ROMMON) software on the Cisco CMTS
routers.
Comprehensive index for the entire manual.

Preface

OL-1581-08