Table of Contents
Advertisement
Chapter 2
Cisco CMTS Configuration Commands
activate-rule at-byte-count
To specify the number of bytes that a subscriber can transmit during the monitoring period, use the
activate-rule at-byte-count command in enforce-rule configuration mode. To reset the rule to its default
values, use the no form of this command.
Syntax Description
kbytes
downstream
upstream
enforce
Defaults
The kbytes value defaults to 0 (no limit), upstream direction, and enforce-rule QoS profiles are not
automatically applied (no enforce)
Command Modes
Enforce-rule configuration
Command History
Release
12.2(15)BC1
Usage Guidelines
The activate-rule at-byte-count command specifies the maximum number of bytes that a subscriber can
transmit during the monitor window period (see the
transmits traffic beyond this maximum value, the CMTS considers the subscriber to be over-consuming.
If the optional enforce keyword has been specified for an enforce-rule, the CMTS automatically
switches over-consuming subscribers to the enforced QoS profile (see the
command). The enforced QoS profile remains in force during the penalty time period (see the
period
OL-1581-08
activate-rule at-byte-count kbytes {downstream | upstream} [enforce]
no activate-rule at-byte-count kbytes {downstream | upstream} [enforce]
Modification
This command was introduced.
command).
Maximum number of kilobytes that the subscriber can transmit in the
specified direction during the monitoring period. The valid range is 1
to 4294967 kilobytes, with a default of 0 (no limit).
To reset the byte count to 0, use the no form of this command.
Note
Specifies that the byte count applies to traffic in the downstream
direction.
Specifies that the byte count applies to traffic in the upstream direction
(default).
(Optional) Specifies that the enforce-rule QoS profile should be
applied automatically if a user violates their registered QoS profile.
You must have previously configured a registered QoS profile,
Note
using the
registered qos-profile
to use the enforce option.
monitoring-duration
Cisco Broadband Cable Command Reference Guide
activate-rule at-byte-count
command, before being able
command). If a subscriber
enforced qos-profile
penalty-
2-11
Advertisement
Table of Contents
