Spanning-Tree Mst Priority - Dell PowerConnect 8024 Cli Reference Manual

Syntax
spanning-tree mst
no spanning-tree mst
instance-ID — ID of the spanning-tree instance. (Range: 1-15)
•
priority — The port priority. (Range: 0–240 in multiples of 16)
•
Default Configuration
The default port-priority for IEEE MSTP is 128.
Command Mode
Interface Configuration (Ethernet, Port-Channel) mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the port priority of port 1/g1 to 144.
console(config)#interface ethernet 1/g1
console(config-if-1/g1)#spanning-tree mst 1 port-priority 144

spanning-tree mst priority

Use the spanning-tree mst priority command in Global Configuration mode to set the switch
priority for the specified spanning-tree instance. To return to the default setting, use the no
form of this command.
Syntax
spanning-tree mst
no spanning-tree mst
instance-id — ID of the spanning-tree instance. (Range: 1-15)
•
priority — Sets the switch priority for the specified spanning-tree instance. This setting
•
affects the likelihood that the switch is selected as the root switch. A lower value increases the
probability that the switch is selected as the root switch. (Range: 0-61440)
Default Configuration
The default bridge priority for IEEE STP is 32768.
478
Spanning Tree Commands
instance-id
port-priority
instance-id
port-priority
instance-id priority
priority
instance-id
priority
priority