Show Ipv6 Pimdm Neighbor; Show Ipv6 Route - Dell PowerConnect 8024 Cli Reference Manual

192.168.36.129 vlan 20
10.1.37.2 vlan 24

show ipv6 pimdm neighbor

The show ipv6 pimdm neighbor command is used to display PIM-DM Neighbor information
including Neighbor Address, Uptime and Expiry time for all interfaces or for the specified
interface.
Syntax
show ipv6 pimdm neighbor [ interface vlan
vlan-id — A valid VLAN ID.
• vlan
• all — To show neighbor information for all valid interfaces.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC
User Guidelines
There are no user guidelines for this command.
Example
console#show ipv6 pimdm neighbor interface vlan 10
Neighbor Addr
--------------- ---------- --------- -----------

show ipv6 route

Use the show ipv6 route command in Privileged EXEC mode to display the IPv6 routing table.
Syntax
show ipv6 route [{ ipv6-address
protocol protocol
[ ] | [all] | all}]
2
1 30
vlan-id
Up Time
Interface hh:mm:ss
protocol
[ ] | {{
30
| all ]
Expiry Time
hh:mm:ss
ipv6-prefix/ ipv6-prefix-length
IPv6 Routing Commands
interface
| }
695