Show Ip Helper Statistics - Dell PowerConnect 8024 Cli Reference Manual

User Guidelines
Field Descriptions:
Interface The relay configuration is applied to packets that arrive on this interface. This field
is set to "any" for global IP helper entries.
UDP Port The relay configuration is applied to packets whose destination UDP port is this
port. Entries whose UDP port is identified as "any" are applied to packets with the
destination UDP ports listed in Table 4.
Discard If "Yes", packets arriving on the given interface with the given destination UDP port
are discarded rather than relayed. Discard entries are used to override global IP
helper address entries which otherwise might apply to a packet.
Hit Count The number of times the IP helper entry has been used to relay or discard a packet.
Server Address The IPv4 address of the server to which packets are relayed.
Example
show ip helper-address
IP helper is enabled
Interface UDP Port
--------------- -----------
vlan 100
vlan 101
any

show ip helper statistics

Use the show ip helper statistics command to display the number of DHCP and other UDP
packets processed and relayed by the UDP relay agent.
Syntax
show ip helper statistics
Default Configuration
This command has no default configuration.
Discard Hit Count
-------- ----------
dhcp No
any Yes
dhcp No
Server Address
---------------
10 10.100.1.254
10.100.2.254
2
0 10.200.1.254
IP Helper Commands
611