Dell PowerConnect 8024 Cli Reference Manual page 76

Cli reference guide
Hide thumbs Also See for PowerConnect 8024:
Table of Contents

Advertisement

802.1X
Command
dot1x mac-auth-bypass
dot1x max-req
dot1x max-users
dot1x port-control
dot1x re-authenticate
dot1x re-authentication
dot1x system-auth-control
dot1x timeout quiet-period
dot1x timeout re-authperiod
dot1x timeout server-timeout
dot1x timeout supp-timeout
dot1x timeout tx-period
show dot1x
show dot1x clients
show dot1x ethernet
show dot1x statistics
show dot1x users
dot1x guest-vlan
dot1x unauth-vlan
76
Command Groups
Description
Enables MAB on an interface.
Sets the maximum number of times the switch sends an
EAP-request frame to the client before restarting the
authentication process.
Sets the maximum number of clients supported on the port
when MAC-based 802.1X authentication is enabled on the
port.
Enables manual control of the authorization state of the
port.
Manually initiates a re-authentication of all 802.1X-enabled
ports or a specified 802.1X enabled port.
Enables periodic re-authentication of the client.
Enables 802.1X globally.
Sets the number of seconds the switch remains in the quiet
state following a failed authentication attempt
Sets the number of seconds between re-authentication
attempts.
Sets the number of seconds the switch waits for a response
from the authentication server before resending the request.
Sets the number of seconds the switch waits for a response
to an EAP-request frame from the client before
retransmitting the request.
Sets the number of seconds the switch waits for a response
to an EAP-request/identify frame from the client before
resending the request.
Displays 802.1X status for the switch or the specified
interface.
Displays detailed information about the users who have
successfully authenticated on the system or on a specified
port.
Shows the status of MAC Authentication Bypass.
Displays 802.1X statistics for the specified interface.
Displays active 802.1X authenticated users for the switch.
Sets the guest VLAN on a port.
Specifies the unauthenticated VLAN on a port.
Mode*
IC
IC
IC
IC
PE
IC
GC
IC
IC
IC
IC
IC
PE
PE
PE
PE
PE
IC
IC

Advertisement

Table of Contents
loading

Table of Contents