Dell PowerConnect 8024 Cli Reference Manual page 314

Example
The following example displays configuration information for the IPv6 ACLs.
console#show ipv6 access-lists
Current number of all ACLs: 1
IPv6 ACL Name
------------------------------- ----- --------- -------------------- -------------
STOP_HTTP
console#show ipv6 access-lists STOP_HTTP
ACL Name: STOP_HTTP
Inbound Interface(s): 1/g1
Rule Number: 1
Action......................................... deny
Protocol....................................... 255(ipv6)
Source IP Address.............................. 2001:DB8::/32
Destination L4 Port Keyword.................... 80(www/http)
Rule Number: 2
Action......................................... permit
Protocol....................................... 255(ipv6)
Source IP Address.............................. 2001:DB8::/32
The command output provides the following information:
Field
Rule Number
Action
Match All
Protocol
Source IP Address This displays the source IP address for this rule.
314
IPv6 Access List Commands
Maximum number of all ACLs: 100
Rules Direction
2
Description
The ordered rule number identifier defined within the IPv6 ACL.
Displays the action associated with each rule. The possible values are Permit or Deny.
Indicates whether this access list applies to every packet. Possible values are True or
False.
This displays the protocol to filter for this rule.
Interface(s)
inbound 1/g1
VLAN(s)