Dell PowerConnect 8024 Cli Reference Manual page 109

Command
switch priority
switch renumber
telnet
traceroute
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
Telnet Server
Command
ip telnet server disable
ip telnet port
show ip telnet
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
User Interface
Command
enable
end
exit(configuration)
exit(EXEC)
mode simple
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
Description
Configures the ability of the switch to become the
Management Switch.
Changes the identifier for a switch in the stack.
Logs into a host that supports Telnet.
Discovers the IP routes that packets actually take when
travelling to their destinations.
Description
Enables/disables the Telnet service on the switch.
Configures the Telnet service port number on the switch.
Displays the status of the Telnet server and the Telnet
service port number.
Description
Enters the privileged EXEC mode.
Gets the CLI user control back to the privileged execution
mode or user execution mode.
Exits any configuration mode to the previously highest
mode in the CLI mode hierarchy.
Closes an active terminal session by logging off the switch. UE
Selects the simple mode as the start up mode.
Mode*
GC
GC
PE
PE
Mode*
GC
GC
PE
Mode*
UE
Any
(All)
GC
109
Command Groups