Show Ip Mcast Mroute Static - Dell PowerConnect 8024 Cli Reference Manual

console#show ip mcast mroute source 10.1.1.1 224.5.5.5
Multicast Route Table
Source IP
--------- --------- ----------- ----------- ------------ -----

show ip mcast mroute static

Use the show ip mcast mroute static command in Privileged EXEC mode to display all the
static routes configured in the static mcast table if it is specified or display the static route
associated with the particular
Syntax
show ip mcast mroute static [
sourceipaddr — IP address of source.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the static routes configured in the static mcast table.
console#show ip mcast mroute static
Source IP
--------------- --------------- --------------- ----------
1.1.1.1
722
Multicast Commands
Expiry
Group IP Time(secs) (secs)
sourceipaddr
sourceipaddr
MULTICAST STATIC ROUTES
Source Mask
255.255.255.0
Up Time
RPF Neighbor Flags
.
]
RPF Address
2.2.2.2
Preference
23