Dell PowerConnect 8024 Cli Reference Manual page 66

LLDP
Command
clear lldp remote data
clear lldp statistics
lldp notification
lldp notification-interval
lldp receive
lldp timers
lldp transmit
lldp transmit-mgmt
lldp transmit-tlv
show lldp
show lldp connections
show lldp interface
show lldp local-device
show lldp remote-device
show lldp statistics
lldp med
lldp med transmit-tlv
lldp med faststartrepeatcount
lldp med confignotification
show lldp med
show lldp med interface
show lldp med remote-device
show lldp med local-device
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
66
Command Groups
Description
Deletes all data from the remote data table.
Resets all LLDP statistics.
Enables remote data change notifications.
Limits how frequently remote data change notifications are
sent.
Enables the LLDP receive capability.
Sets the timing parameters for local data transmission on
ports enabled for LLDP.
Enables the LLDP advertise capability.
Specifies that transmission of the local system management
address information in the LLDPDUs is included.
Specifies which optional TLVs in the 802.1AB basic
management set will be transmitted in the LLDPDUs.
Displays the current LLDP configuration summary.
Displays the current LLDP remote data.
Displays the current LLDP interface state.
Displays the LLDP local data
Displays the LLDP remote data
Displays the current LLDP traffic statistics.
Enables/disables LLDP-MED on an interface.
Spwcifies which optional TLVs in the LLDP MED set are
transmitted in the LLDPDUs.
Sets the value of the fast start repeat count.
Enables sending the topology change notifications.
Displays a summary of the current LLDP MED
configuration.
Displays a summary of the current LLDP MED
configuration for a specific interface.
Displays the current LLDP MED remote data.
Displays the advertised LLDP local data.
Mode*
PE
PE
IC
GC
IC
GC
IC
IC
IC
PE
PE
PE
PE
PE
PE
IC
IC
GC
IC
PE
PE
PE
PE