Dell PowerConnect 8024 Cli Reference Manual page 96

Tunnel Interface
Command
interface tunnel
show interface tunnel
tunnel destination
tunnel mode ipv6ip
tunnel source
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
Virtual Router Redundancy
Command
ip vrrp
ip vrrp authentication
ip vrrp ip
ip vrrp mode
ip vrrp preempt
ip vrrp priority
ip vrrp timers advertise
ip vrrp track interface
ip vrrp track ip route
show ip vrrp
show ip vrrp interface
show ip vrrp interface brief
96
Command Groups
Description
Enables the interface configuration mode for a tunnel.
Displays the parameters related to tunnel such as tunnel
mode, tunnel source address and tunnel destination
address.
Specifies the destination transport address of the tunnel.
Specifies the mode of the tunnel.
Specifies the source transport address of the tunnel, either
explicitly or by reference to an interface.
Description
Enables the administrative mode of VRRP for the router.
Sets the authorization details value for the virtual router
configured on a specified interface.
Sets the virtual router IP address value for an interface.
Enables the virtual router configured on an interface.
Enabling the status field starts a virtual router.
Sets the preemption mode value for the virtual router
configured on a specified interface.
Sets the priority value for the virtual router configured on a
specified interface.
Sets the frequency, in seconds, that an interface on the
specified virtual router sends a virtual router advertisement.
Alters the priority of the VRRP router based on the
availability of its interfaces.
Tracks route reachability.
Displays whether VRRP functionality is enabled or disabled
on the switch.
Displays all configuration information and VRRP router
statistics of a virtual router configured on a specific
interface.
Displays information about each virtual router configured
on the switch.
Mode*
GC
PE
IC
IC
IC
Mode*
GC
IC
IC
IC
IC
IC
IC
IC
IC
PE
PE
PE