Show Ip Ospf Virtual-Link - Dell PowerConnect 8024 Cli Reference Manual

Example
The following example displays the OSPF stub table.
console(config)#show ip ospf stub table
AreaId
------------- -------------
0.0.0.1

show ip ospf virtual-link

Use the show ip ospf virtual-link command in Privileged EXEC mode to display the OSPF
Virtual Interface information for a specific area and neighbor.
Syntax
show ip ospf virtual-link
area-id — Identifies the OSPF area whose ranges are being displayed. (Range: IP address or
•
decimal from 0–4294967295)
neighbor-id — Identifies the neighbor's router ID. (Range: Valid IP address)
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays the OSPF Virtual Interface information for area 10 and its
neighbor.
console#show ip ospf virtual-link 10 192.168.2.2
Area ID........................................ 10
Neighbor Router ID............................. 192.168.2.2
778
OSPF Commands
TypeofService Metric Val Import SummaryLSA
---------- -----------------
Normal
area-id neighbor-id
1 Enable