Show Captive-Portal Configuration; Show Captive-Portal Configuration Interface - Dell PowerConnect 8024 Cli Reference Manual

Captive Portal Status Commands

show captive-portal configuration

Use the show captive-portal configuration command to display the operational status of each
captive portal configuration.
Syntax
show captive-portal configuration
cp-id
—Captive Portal ID.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal configuration 1
CP ID..................................... 1
CP Name................................... cp1
Operational Status........................ Disabled
Disable Reason............................ Administrator Disabled
Blocked Status............................ Not Blocked
Authenticated Users....................... 0

show captive-portal configuration interface

Use the show captive-portal configuration interface command to display information about all
interfaces assigned to a captive portal configuration or about a specific interface assigned to a
captive portal configuration.
Syntax
show captive-portal configuration
904
Captive Portal Commands
cp-id
cp-id interface
interface [ ]