Show Ipv6 Ospf Interface Stats - Dell PowerConnect 8024 Cli Reference Manual

User Guidelines
This command has no user guidelines.
Example
The following example displays brief ospf interface information.
console#show ipv6 ospf interface brief
Interface
--------- -------- --------

show ipv6 ospf interface stats

Use the show ipv6 ospf interface stats command in User EXEC mode to display the statistics
for a specific interface. The command only displays information if OSPF is enabled.
Syntax
show ipv6 ospf interface stats vlan
vlan-id — Valid VLAN ID.
•
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays the interface statistics for VLAN 5.
console>show
OSPFv3 Area ID................................. 0.0.0.1
Spf Runs....................................... 265
Area Border Router Count....................... 1
820
OSPFv3 Commands
Admin
Mode Area ID
ipv6 ospf interface stats
Hello Dead
Router Int.
Prior. Cost Val.
------ ----- ----- ----- ------ ------ -----
vlan-id
Retrax
Int. Int. Retrax Ack
Val. Val. Delay
vlan 5
LSA
Intval