Dell PowerConnect 8024 Cli Reference Manual page 92

Command
ipv6 ospf retransmit-interval
ipv6 ospf transmit-delay
ipv6 router ospf
maximum-paths
passive-interface
passive-interface default
redistribute
router-id
show ipv6 ospf
show ipv6 ospf abr
show ipv6 ospf area
show ipv6 ospf asbr
show ipv6 ospf database
show ipv6 ospf database database-
summary
show ipv6 ospf interface
show ipv6 ospf interface brief
show ipv6 ospf interface stats
show ipv6 ospf interface vlan
show ipv6 ospf neighbor
show ipv6 ospf range
show ipv6 ospf stub table
show ipv6 ospf virtual-link
92
Command Groups
Description
Sets the OSPF retransmit interval for the specified
interface.
Sets the OSPF Transmit Delay for the specified interface.
Enters Router OSPFv3 Configuration mode.
Sets the number of paths that OSPF can report for a given
destination.
Sets the interface or tunnel as passive.
Enables the global passive mode by default for all interfaces. ROSV3
Configures the OSPFv3 protocol to allow redistribution of
routes from the specified source protocol/routers.
Sets a 4-digit dotted-decimal number uniquely identifying
the Router OSPF ID.
Displays information relevant to the OSPF router.
Displays the internal OSPFv3 routes to reach Area Border
Routers (ABR).
Displays information about the area.
Displays the internal OSPFv3 routes to reach Autonomous
System Boundary Routes (ASBR).
Displays information about the link state database when
OSPFv3 is enabled.
Displays the number of each type of LSA in the database
and the total number of LSAs in the database.
Displays the information for the IFO object or virtual
interface tables.
Displays brief information for the IFO object or virtual
interface tables.
Displays the statistics for a specific interface.
Displays OSPFv3 configuration and status information for a
specific vlan
Displays information about OSPF neighbors.
Displays information about the area ranges for the specified
area identifier.
Displays the OSPF stub table.
Displays the OSPF Virtual Interface information for a
specific area and neighbor.
Mode*
IC
IC
GC
ROSV3
IC
ROSV3
ROSV3
PE
PE
PE
PE
PE
PE
PE
PE
UE
PE
PE
PE
PE
PE