Utility Commands - Dell PowerConnect 8024 Cli Reference Manual

Command
show ip vrrp interface stats
vrrp track interface
vrrp track ip route
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.

Utility Commands

Auto Config
Command
boot host auto-save
boot host dhcp
boot host retry-count
show boot
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
Captive Portal
Command
authentication timeout
captive-portal
http port
https port
show captive-portal
show captive-portal status
block
configuration
enable
Description
Displays the statistical information about each virtual
router configured on the switch.
Alters the priority of the VRRP router based on the
availability of its interfaces.
Tracks route reachability.
Description
Enables/disables automatically saving the downloaded
configuration on the switch.
Enables/disables Auto Config on the switch.
Set the number of attempts to download a configuration.
Displays the current status of the Auto Config process.
Description
Configures the authentication timeout.
Enables the captive portal configuration mode.
Configures an additional HTTP port for captive portal to
monitor.
Configures an additional HTTPS port for captive portal to
monitor.
Displays the status of captive portal.
Reports the status of all captive portal instances in the
system.
Blocks all traffic for a captive portal configuration.
Enables the captive portal instance mode.
Globally enables captive portal.
Mode*
PE
IC
IC
Mode*
GC
GC
GC
PE
Mode*
CP
GC
CP
CP
PE
PE
CPI
CP
CPI
97
Command Groups