Management Access-Class - Dell PowerConnect 8024 Cli Reference Manual

Default Configuration
This command has no default configuration.
Command Mode
Management Access-list Configuration mode
User Guidelines
Rules with ethernet, vlan, and port-channel parameters are valid only if an IP address is defined
on the appropriate interface. Ensure that each rule has a unique priority.
Example
The following example shows how all ports are denied in the access-list called
console(config)# management access-list mlist
console(config-macl)# deny

management access-class

Use the management access-class command in Global Configuration mode to restrict
management connections. To disable restriction, use the no form of this command.
Syntax
management access-class {console-only|
no management access-class
name — A valid access-list name. (Range: 1–32 characters)
•
console-only — The switch can be managed only from the console.
•
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures an access-list called
960
Management ACL Commands
name
}
mlist
as the management access-list.
mlist
.