Show Trapflags Captive-Portal - Dell PowerConnect 8024 Cli Reference Manual

Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal configuration status
CP ID CP Name
----- ---------------
1 cp1
2 cp2
3 cp3
console#show captive-portal configuration 1 status
CP ID.......................................... 1
CP Name........................................ cp1
Mode........................................... Enabled
Protocol Mode.................................. https
Verification Mode.............................. Guest
Group Name..................................... group123
Redirect URL Mode.............................. Enabled
Redirect URL................................... www.cnn.com
Session Timeout (seconds)...................... 86400

show trapflags captive-portal

Use the show trapflags captive-portal command to display which captive portal traps are
enabled.
Syntax
show trapflags captive-portal
Mode Protocol
-------- --------
Enable https
Enable http
Disable https
Verification
------------
Guest
Local
Guest
Captive Portal Commands
907