Dell PowerConnect 8024 Cli Reference Manual page 120

Command Mode
User EXEC
Privileged EXEC
Global Configuration
Line Interface
Management Access-List From Global
Policy-Class-Map
120
Using the CLI
Access Method
The user is
automatically in User
EXEC mode unless the
user is defined as a
privileged user.
Use the enable
command to enter into
this mode. This mode is
password protected.
From Privileged EXEC
mode, use the configure
command.
From Global
Configuration mode,
use the line command.
Configuration mode,
use the management
access-list command.
From Global
Configuration mode,
use the policy-map class
command.
Command Prompt
console>
console#
console(config)#
console(config-
line)#
console(config-
macl)#
console(config-
policy-classmap)#
Exit or Access
Previous Mode
logout
Use the exit
command, or press
<Ctrl>+<Z> to
return to the User
EXEC mode.
Use the exit
command, or press
<Ctrl>+<Z> to
return to the
Privileged EXEC
mode.
To exit to Global
Configuration
mode, use the exit
command, or press
<Ctrl>+<Z> to
Privileged EXEC
mode.
To exit to Global
Configuration
mode, use the exit
command, or press
<Ctrl>+<Z> to
Privileged EXEC
mode.
To exit to Global
Configuration
mode, use the exit
command, or press
<Ctrl>+<Z> to
Privileged EXEC
mode.