Show Ip Mcast - Dell PowerConnect 8024 Cli Reference Manual

The following table shows the information the command displays:
Field Description
Capacity The maximum number of addresses that can be stored in the multicast address
table.
Used The total number of addresses in the multicast address table.
Static addresses The number of addresses in the multicast address table that are static IP addresses.
Dynamic addresses The number of addresses in the multicast address table that were learned
dynamically.
Forbidden addresses The number of addresses in the multicast address table that are forbidden IP
addresses.

show ip mcast

Use the show ip mcast command in Privileged EXEC mode to display the system-wide
multicast information.
Syntax
show ip mcast
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays system-wide multicast information.
console#show ip mcast
Admin Mode..................................... Enabled
Protocol State................................. Non-Operational
Table Max Size ................................ 256
Protocol....................................... PIMDM
Multicast Forwarding Cache Entry Count ........ 0
Multicast Commands
717