Link-Dependency Group - Dell PowerConnect 8024 Cli Reference Manual

Link Dependency Commands
This chapter explains the following commands:
•

link-dependency group

• no link-dependency group
• add ethernet
• add port-channel
• add port-channel
• no add port-channel
• depends-on ethernet
• no depends-on ethernet
• depends-on port-channel
• no depends-on port-channel
• show link-dependency
link-dependency group
Use the link-dependency group command to enter the link-dependency mode to configure a
link-dependency group
Syntax
link-dependency group
GroupId — Link dependency group identifier. (Range: 1–16)
•
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
No specific guidelines
GroupId
Link Dependency Commands
23
343