Show Ip Arp Inspection Statistics - Dell PowerConnect 8024 Cli Reference Manual

Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC
User Guidelines
The following fields are displayed for each interface:
Interface
Trust State
Rate Limit
Burst Interval
Example
console#show ip arp inspection ethernet
Interface
---------------
1/g1
1/g2

show ip arp inspection statistics

Use the show ip arp inspection statistics command to display the statistics of the ARP packets
processed by Dynamic ARP Inspection. Given vlan-range argument, it displays the statistics on
all DAI enabled Vlans in that range. In the case of no argument, it lists the summary of the
forwarded and dropped ARP packets.
Syntax
show ip arp inspection statistics [vlan
vlan-range —A valid VLAN range.
•
Default Configuration
There is no default configuration for this command.
230
Dynamic ARP Inspection Commands
The interface-id for each displayed row.
Whether interface is trusted or untrusted for DAI.
The configured rate limit value in packets per second.
The configured burst interval value in seconds.
Trust State Rate Limit
----------- ----------
Untrusted
Untrusted
vlan-range
Burst Interval
(pps) (seconds)
---------------
15
10
]
1
10