Dell PowerConnect 8024 Cli Reference Manual page 99

Command
show captive-portal configuration
interface
show captive-portal configuration
locales
show captive-portal configuration
status
show captive-portal trapflags
user group
user group moveusers
user group name
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
Clock
Command
clock set
show clock
show sntp configuration
show sntp status
sntp authenticate
sntp authentication-key
sntp broadcast client enable
sntp client enable
sntp client poll timer
sntp server
sntp trusted-key
sntp unicast client enable
clock timezone hours-offset
no clock timezone
Description
Displays information about all interfaces assigned to a
captive portal configuration or about a specific interface
assigned to a captive portal configuration.
Displays locales associated with a specific captive portal
configuration.
Displays information about all configured captive portal
configurations or a specific captive portal configuration.
Displays which captive portal traps are enabled.
Creates a user group.
Moves a group's users to a different group.
Configures a group name.
Description
Sets the current date and time.
Displays the time and date of the system clock.
Displays the SNTP configuration.
Displays the SNTP status.
Set to require authentication for received NTP traffic from
servers.
Defines an authentication key for SNTP .
Enables SNTP Broadcast clients.
Enables SNTP Broadcast and Anycast clients on an
interface.
Defines polling time for the SNTP client.
Configures the SNTP server to use SNTP to request and
accept NTP traffic from it.
Authenticates the identity of a system to which Simple
Network Time Protocol (SNTP) will synchronize.
Enables clients to use Simple Network Time Protocol
(SNTP) predefined Unicast clients.
Sets the offset to Coordinated Universal Time.
Resets the time zone settings.
Mode*
PE
PE
PE
PE
CP
CP
CP
Mode*
GC
PE
PE
PE
GC
GC
GC
IC
GC
GC
GC
GC
GC
GC
99
Command Groups